click image to order a catalogue.
Precision Roller Chains to both
British Standard (B.S.)
and American Standard (A.N.S.I.)
from 1/4" to 2.1/2" in simplex
and multistrand forms.
Drives suitable for powers from
fractional to 2500 kW with operating
speeds up to 25 metres per second.
Cross & Morse produce only high
performance Roller Chain of
consistent quality, using modern
manufacturing technology combined
with long established and proven
Roller Chain PDF Catalogue
Construction and Attachment
For conveying and transportation
a large range of attachments
includes standard stock K and
M plates, extended pins, and
hollow pin chain, plus many
custom designed attachments.
Stainless steel and special
plated chains suitable for high
temperature and corrosive applications
can also be supplied.
Cross+Morse have experience in producing
several different types of chain for
Chocolate Moulding plant chain
Flow wrap In Feed chains
Shrink wrap tunnel chains
Special Construction and Attachment Chains PDF Catalogue
and SC Inverted Tooth Chains
Morse H-V Chains provide the
designer with a new concept
for the transmission of high
torques with high shaft speeds.
Smooth running drives, with
low noise level, transmit up
to 4000 kW with shaft speeds
up to 12,000 rpm. Proved in
a wide range of applications
from Automotive Transmissions,
to flood control pumps. H-V
Chain offers many design advantages
over gears, roller chain or
timing belt drives.
Spring loaded tensioners extend
the life of roller chain, particularly
on long centre distance drives.
These products are suitable
for simplex and multistrand
Rotary Chain Tensioner: Automatic
90° tensioning action.
Linear Chain Tensioner: Automatic
Chain guides made from self
lubricated UHMW polyethylene.
Fixed Chain Tensioner: Manually adjustable
with UHMW polyethylene guides.
Tensioners PDF Catalogue
Roller Chain tools reduce time both
in the field and in the shop and
are a necessity for disconnecting
roller chains from bulk length, or
for chain repair and alteration purposes.
The tool requires virtually no
maintenance, all parts being produced
from high grade steels, with moving parts
hardened for maximum strength and wear
Tool Number 36 - 3/8” - 3/4” / 05B-12B / 25-60 / 208-212
Tool Number 610 - 3/4” - 1.1/4”/ 12B-16B/ 60-100/ 212-216
Tool Number 1220 - 1.1/4” - 2”/ 20B-16B/ 120-160
This unique tool was designed to make roller chain installation quick
and easy both in the field and the workshop.
In use the pullers jaws are opened by releasing the screw, and then
hooked into each open end of the chain. The screw is tightened to
bring the two ends of the chain almost together with bush centres
pitch length apart. The connecting link is then easily fitted to the
chain. Three sizes of unit are available as below:
Tool Number 35 - 3/8” - 3/4” / 06B-12B / 35-60 / 208-212
Tool Number 50 - 1/2” - 1”/ 08B-16B/ 40-80/ 208-216
Tool Number 80 - 1” - 2”/ 16B-32B/ 80-160/ 216-224
Rivet Extractors and Chain Pullers PDF Catalogue
Go to top