 |
HANGER BEARINGS ...
for eccentric drives with setscrew locking
and an external lube fitting. Seal options are
single lip contact type or Hi-Temp for operating temperatures 250 - 400°.
Available for shaft dia 15/16" to 4" or 25 to 100mm.
|
 |
| |
HANGER BEARINGS ...
for screw conveyors with setscrew locking
and lube capabilities through the mounting pipe.
Available for shaft dia 15/16" to 4" or 25 to 100mm.
|
|
| |
RUBBER
MOUNTED PILLOW BLOCK ... These
two bolt pillow blocks have setscrew locking and are
available for shaft dia 1/2" to 1.1/4".
|
|
| |
RUBBER MOUNTED FLANGE BLOCKS ... have
setscrew locking and a two bolt fitting.
Available for shaft dia 1/2" to 1.1/4".
|
|
| |
RUBBER
MOUNTED CARTRIDGE UNITS ...
with setscrew locking and available for
shaft dia 1/2" to 1.1/4".
|
|
| |
H FRAME TAKE UP UNITS ... are
side mounting frame take up units designed
to incorporate either the ST or MST series
take up units. They are used where shaft adjustment
and/ or belt tightening is required in conveyor
applications. Available for shaft dia 7/8" to 2.15/16".
|
|
